Versatile architectural attachment, manufactured from bright nickel-plated brass, designed for static lightweight fixtures or fittings with an M6 female thread or through hole. Ideal for installing into lighting or signage. The attachment can be screwed into a threaded fixing or directly into a fixture. APPLICATIONS Lighting Light duty signage FEATURES Allows for one single suspension point from the ceiling. Fully lockable plunger for safety and security. Side exit for main vertical support which allows for height adjustment at service level. Can be supplied with a variety of ceiling fixings. Available in kit format – lengths from 1-3 metres. INSTALLATION Fully screw the male thread clockwise into the female thread or pass the male thread into a “through hole” and use the integral nut and washer to lock it into place. Unscrew the lockable plunger anti-clockwise allowing it to actuate, do not unscrew fully. Feed vertical wire support through the top of the plunger until it appears at the side exit. Pull wire through the side exit allowing an adequate tail. Screw the lockable plunger clockwise to lock off the device. Once secure, the exit tail can be trimmed to 25 mm minimum.