Due to sturdy design, the closure is resistant to wild environment, intensive climate changes and serious work-related environment. The flexible arrangement of splice trays allows for operating each optical cable and fiber individually.

The closure casing is made of quality engineering plastics
Anti-erosion against acid and alkali salt
Anti-aging and reliable mechanical structure
IP68 protection
The closure is of small volume and big capacity
It allows for convenient maintanence and can be opened repeatedly without air leakage

DESCRIPTION
The optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. They are applicable for overhead, man-well of pipeline, embedded situation etc. The closures are more secure due to presence of seal for higher protection. The inclusion of sealing ring and air valve makes it more suitable for relevant application areas. They are applicable to ribbon type optical cable and common optical cable. Splice trays inside the closure rotate like booklets and have sufficient space for winding the optical fibers.

TECHNICAL DETAILS
The insulation resistance between the metal work piece and the earth is greater than 20kMΩ
Pressurization: there is no breakdown or flashover under 15kVdc/1min between the metal work piece and the earth
The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
It can bear the axial tensile strength no less than 1000N.
Max Capacity: 48 Cores
Number of Cable Entrance/Exit : 1:3 or 2:2
Diameter of Cable : 4 small round ports (16mm)
Temperature : -40℃~+60℃
Humidity : ≤95% (at 40℃)
Air Pressure : 70kPa ~106kPa
Lifetime : 25 years
Dimensions (D x H): 300 x190 mm

PACKAGE CONTENT
1x Digitus fiber optic splice closure, 48 cores, dome-shaped
1x Tag paper
1x Sand paper / 1 x Silver paper
1x Sealing rubber strip
1x Insulating tape
1x Cleaning tissue
4x Plastic plug
1x Fiber protective tube
1x Heat-Shrink sleeve
3x Cable tie